denon avr 887 owners manual

In Subwoofer Level. D D H H ENTER Press to select “iPod Assign”, then press. D D H H Press to select “Function Rename”, then press ENTER D D H H Press to select the input function, then press to set. D D H H ENTER Press to select “Preset Skip”, then press D D H H Press to select the preset channel, then press to set. The on screen display signals of AVR-887 are output with a resolution of 480i. Analog video signals are converted into digital video signals with the same resolution with which they were input and are then output from the HDMI terminal. The surround mode used at last for the four types of input signals shown below is stored in the memory, and the signal is automatically played with that surround mode the next time it is input. D D H H Press to select “Subwoofer Setup”, then press ENTER F F G G Press to set. D D H H ENTER Press to select “Channel Level”, then press F F G G Press. For speakers that are set to “Small”, frequencies under the crossover frequency are cut before the signal is output, and the low frequency component that was cut is output from the subwoofer or the speakers that are set to “Large”. D D H H Press to select “Direct Mode Setup”, then press ENTER F F G G Press. When a new code is preset, the previous code is automatically deleted. By default, nothing is set. Printed in China 00D 511 4487 006. We have 3 Denon AVR-887 manuals available for free PDF download: Service Manual, Operating Instructions Manual, Specifications IN) Terminals. Please use the previous link instead. Select a product Please use the previous link instead. Select a category Bluetooth or Wi-Fi connection is recommended. More There are a number of things that could cause this. You want to make sure you have at least six inches of clearance between the top of the receiver and. More Our Support team can be reached by calling (201) 762-6665 Monday - Friday, 10:00 AM to 7:00 PM and on Sat from. More The Denon Parts Dept is available Mon-Fri, 9 AM to 5 PM EST.

• denon avr 887 owners manual, denon avr 887 owners manual.

IN Subwoofer Level Modification not expressly approved by DENON may void your authority, granted by the FCC, to use the product. 3. NOTE This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. This remarkable component has been engineered to provide superb surround sound listening with home theater sources such as DVD, as well as providing outstanding high fidelity reproduction of your favorite music sources. Set the volume to halfway and set the crossover frequency to the maximum or Low pass filter off if your subwoofer can adjust the output volume and the crossover frequency. Some subwoofers have a standby mode. Measurement of each channel is performed as follows: 1: The subwoofer speaker is measured twice. 2: Not displayed when “ZONE2” and “Front” are set at “Setting the Power Amplifier Assignment”. Please check the following matters, reset the pertinent items, and measure again. In this case, connect the DVD player’s analog multi-channel output to the AVR-887’s EXT. IN terminals for playback. Also refer to your DVD player’s operating instructions. The diagram below shows an example of connections for when the iPod is assigned to the VCR-2 terminal. Can be selected for sources for which the “Digital In Assignment” ( page 49) is made. We recommend using the surround modes as described below in order to achieve the maximum effect for the specific signal source. One of seven surround modes can be selected according to the program source and parameters can be further adjusted to achieve even more realistic sound fields. Press to select “OFF”. The AVR-887 can display up to 64 characters, consisting of numbers, capital letters and small letters. Set the Room Equalizer setting with “All” or “Assign” for each surround mode. The playback level is corrected individually for the different input sources. We recommend that you use the on screen display when you make system adjustments.

Please enter your email address. By using our website, you agree to our use of cookies.Get news, info, tips and offers straight to your inbox. Sign up - you know you want to. Choose your country below to get started. Ramon Rivero y Av. Oquendo - Recoleta Edificio Cine Center - Local Sky Games Cochabamba Bolivia TEL: Parque Industrial Naucalpan CP 53480 Estado de Mexico Mexico TEL: Rogelio Cantu 370 Col.Biharia 67-77, Sector 1, Metav Business Park, Building C Bucharest TEL: Malaysia TEL: Economia Sts. Libis, Quezon City, Philippines. No 5034 5D ASH SHERA, Unit No 1 Alazizyah, Alkobar 34742-6965 Saudi Arabia TEL: AB1408 Jebel Ali, Dubai. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with Denon AVR-887. To start viewing the user manual Denon AVR-887 on full screen, use the button Fullscreen. However, if you do not want to take up too much of your disk space, you can always download it in the future from ManualsBase. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual Denon AVR-887 but the selected pages only. paper. If you want to quickly view the content of pages found on the following pages of the manual, you can use them. Operation is subject to the following two conditions: (1) this product may not cause harmful interference, and (2) this product must accept any interference received, including interference that may cause undesired operation. 2. IMPORTANT NOTICE: DO NOT MODIFY THIS PRODUCT This product, when installed as indicated in the instructions contained in this manual, meets FCC requireThis remarkable component has been engineered to provide superb surround sound listening with home theater sources such as DVD, as well as providing outstanding high fidelity reproduction of your favorite music sources.

More Please follow this FAQ to fix the issue. Please consider reviewing our FAQs to see if your inquiry is covered and don’t forget to check our YouTube channel for setup and installation videos. We apologize for the inconvenience and appreciate your patience during this challenging time.All hours are Eastern Standard Time. Connecting Other Sources Connecting Other Sources. Monitor. If you choose to use the coaxial connection, it needs to be assigned. For more information about Digital Input Assignment ( page 49).If you choose to use the coaxial connection, it needs to be assigned. For more. Please choose a different delivery location.Our payment security system encrypts your information during transmission. We don’t share your credit card details with third-party sellers, and we don’t sell your information to others. Please try again.Please try again.Please try again. This is NOT an original as originals are out of print, but we use the best scans available. Plastic Comb Bound with clear plastic on front and back covers to help protect manual. All manuals are in public domain or printed with permission. Then you can start reading Kindle books on your smartphone, tablet, or computer - no Kindle device required. Register a free business account To calculate the overall star rating and percentage breakdown by star, we don’t use a simple average. Instead, our system considers things like how recent a review is and if the reviewer bought the item on Amazon. It also analyzes reviews to verify trustworthiness. Post your question here in this forum. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share. Note that email addresses and full names are not considered private information. Please mention this; Therefore, avoid filling in personal details.

Relationship between the video input signal and. Connecting equipment with HDMI terminals. Connecting the external inputs (EXT. Connecting the MULTI ZONE terminals. Basic Operation. Using the surround modes. Selecting the Dolby Digital and DTS Surround modeListening to the radio. Advanced Operation. User mode function. Combining the currently playing sound. Viewing still pictures and videos. Outputting a program source to amplifier, etc.,Video Setup. Advanced Playback. Option Setup. Operating the remote control unit. Accessories. Check that the following parts are attached in addition to the mainSpeaker Setup. Others SetupGetting Started. Before using. About the remote control unit. Pay attention to the following before using this unit. To prevent short-circuits or damaged wires in the connection cables,Using a mobile phone near this unit may result in noise. If so, moveCheck once again that all connections are correct and that there areAlways set the powerIn addition to controlling the AVR-887, the attached remote controlPlease be sure to turn off the power operation button or unplugCautions on installation. Note. For heat dispersal, do not install this unit in a confined space suchNoteInserting the batteries. After reading the operating instructions, store them in a safe placeOperating range of the remote control unitNotes on batteries:WallGetting Started. For details on the functions of these parts, refer to the pages given in parentheses ( ). Front panelRemove the cap covering the terminals whenThe audio channels that can be output light.This lights corresponding to the settings of theThis displays the volume level. The Setup item number is displayed in System. Setup. CURSOR F button when turned counterclockwise,Lights while selecting the ZONE2 or REC. SELECT mode. (Off when the “SOURCE” isThis lights when the broadcast station is selectedThis lights when an FM stereo broadcast hasGetting Started. Rear panelRemote control signalMaster volume control.

As this product is provided with an immense array of features, we recommend that before you begin hookup and operation that you review the contents of this manual before proceeding. Contents Getting Started CoAuto setup flow Connecting a microphone ( pagePress SYSTEM SETUP. output. 1 1 Set the volume to halfway and set the crossover frequency to Press D D H H to select “Power Amp Assign”, then press F F the maximum or Low pass filter off if your subwoofer can adjust Press D D H H to select “Auto SetuPress D D H H to select an item, then press ENTER. The exclamation point within an equilateral triangle isUse only with a cart, stand,This product should not be placed in a built-inIf you are not sure of the typeThis plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing theDo not defeat the safety purpose of the polarizedWhen installing anNever spill liquid of anyRefer all servicing to qualified service personnel.Unauthorized substitutions may result in fire, electric shock, or otherOperation is subjectModification not expressly approved by. DENON may void your authority, granted by the FCC, to use the product.B digital device, pursuant to Part 15 of the FCC Rules. These limits areThis product generates, uses and can radiate radio frequency energy and, ifHowever, there is noAllow for sufficient heat dispersion when installedThis Class B digital apparatus complies with Canadian ICES-003. Hold the plug when unplugging the cord.This remarkable component has been engineered to provide superb surround sound listening with home theater sources such as DVD, as well asAs this product is provided with an immense array of features, we recommend that before you begin hookup and operation that you review the contents of this manual before proceeding. Contents. Getting Started. Part names and functions. Easy Setup Procedure. Connecting Other Sources.

Because of this, if theSetup” (AVR-887, the on screen display is displayed on the monitor whenConnecting Other Sources. S-Video andYou can do this by either a component or a video or a S-Video connection.MonitorConnecting Other Sources. Connecting a CD player. IN) terminals. To connect the digital audio output from the CD player, you can choose from either the coaxial or opticalFor more informationAudio CD player, or other future multi-channel sound format decoder.IN) terminals (CD player. External decoderIn this case, connect the DVD player’s analog multi-channelIN terminals for playback. Also refer to your DVD player’s operatingMC head amplifier or step-up MC transformer.Connecting Other Sources. Connecting equipment with HDMI terminalsIn this case, change the setting of the resolution on the sourceNormal playback may not be possible if a cable that does not include the HDMI logo (non-HDMIcertified product) is used.To provide audio output from the TV, select “TV” at the “HDMI In Assign” (MonitorDolby DigitalSuper Audio CD. Stereo area. CD areaDigital Content Protection System). HDCP is copyThe AVR-887 supports HDCP. Please see theThe AVR-887 is HDMI Ver. 1.1 compatible.Connecting Other Sources. Connecting a DVD recorderIf you choose to use the optical connection, it needs to beConnecting a VCRFor more informationDVD recorderThe source selected in the REC SELECT mode is not associated with the output from the digital outputConnecting Other Sources. Connecting a tape deck, CD recorder or MD recorder. Connecting the. When using an iPod, you must connect the Control Dock for iPod (ASD-1R, sold separately) and the DOCKThe diagram below shows an example of connections for when the iPod is assigned to the VCR-2For more information about Digital. Input Assignment (For instructions on assigning the iPod to a specific terminal, see “Setting the iPod Assignment” (For instructions on playing the iPod, see “Playing the iPod” (MD recorderConnecting Other Sources.

Connecting the antenna terminalsAn F-type FM antenna cable plug can be connected directly. Direction of broadcasting station. AM loop antennaFM antenna. Note to CATV system installer. This reminder is provided to call the CATVConnecting the XM terminal. Passport System (sold separately) and subscribing to the XM service. For details, see “XM Satellite Radio” (When making connections, also refer to the operating instructions of the XM Passport System. FM indoor antenna (Supplied). XM Passport SystemGroundConnect to the AMConnection of AM antennasAll rights reserved. All rights reserved.MountInstallation hole Mount on wall, etc.Connecting Other Sources. ZONE2 speaker out connections. For instructions on operations using the MULTI ZONE functions (ZONE2 stereo 2 channel. In this case, surround back speaker out can not be used for MAIN ZONE. ZONE2 out connectionsCenterSurroundSubwoofer. Connection terminal forPower amplifierPlaying the input sourceUse FUNCTION to select the input source you want toThe type of input signal is detected and the AVR-887’s surroundCan be selected for sources forThe input switches to the analog input terminals is no digital signalsPCM (exclusive PCM signal playback mode) and. DTS (exclusive DTS signal playback mode). Played when the various signals are input. Noise may be generatedANALOG (exclusive analog audio signal playback mode) and. EXT. IN (External decoder input terminal selection mode). The signals input to the various input terminals are played.Button name only. Buttons on the main unit and remote control unitTo lower the subwoofer channel level in the EXT. IN mode, press. SURROUND PARAMETER and select “SW. ATT”. For some players the playback level of the SW channel may seenFor operating instructions, refer to the component’s manual.Cautions when playing DTS sources:Noise will be generated if you play in the “ANALOG” or “PCM”Basic Operation. Turning the sound off temporarily (MUTING).

Cursor buttons. Mode selectorGetting StartedEasy Setup Procedure. Example of basic layout with eight speakers and a monitor.Subwoofer. Center speaker. Surround back speaker. Easy to setup flow. Placing the speakers. Auto setup flow. Connecting the speakers. Connect the DVD player toConnect the AVR-887’sConnecting a microphone (The measurement of the speakers in theSet these at the sides of theSpeaker Configuration. Distance. Channel Level. Room Equalizer. Check of the measurement result. Store the measurement result in the memory. Play a DVD.Easy Setup ProcedureSpeaker connections. Connect the speaker terminals with the speakersNEVER touch the speaker terminals whenConnecting the speaker cablesEither tightly twist or terminate the coreSpeaker. Impedance. Front A, B. CenterConnection terminal forCenter. Surround. SurroundSubwooferNormal. Adjust the frequency response of all speaker suitable for generalFront. This adjusts the characteristics of each speaker to theFlat. This the frequency response of all speakers flat. This mode isMicrophoneIt is not possible to measure properly if there are any obstaclesCheck that there are noButton name only. Buttons on the main unit and remote control unitSet the volume to halfway and set the crossover frequency toSome subwoofers have a standby mode. Be sure to turn thisTurn on your monitor.The message “Connect Microphone” is displayed if noIf so, connect the auto setupThe surround back output can be assigned to the “Front” or “ZONE2”Press D H to select “Power Amp Assign”, then press F. G to set. Surround Back. Assign to use as surround back speaker.Front A, Front B. Assign to use the “Front A” or “Front B” speakers with bi-ampWhen assigned to “Front” or “ZONE2”, skip the surround backDuring the auto setup procedure, test tones are not output toPress D H to select “Front Sp”, then press F G to selectFront A. Front BEasy Setup ProcedurePress D H to select “Start”, then press F.

Measurement of each channel is performed as follows:Power Amplifier Assignment” (Cautions during measurements:Auto Setup is performed.To confirm the results of the measurements, remeasurement isRemeasurement is performed up to two times. During this time,The measurement results of each item can be checked here.Store. All the settings are stored in the memory. Retry. Perform the measurement again. Measurement is repeated. Cancel. Cancel the auto setup settings.Press F.Easy Setup Procedure. Error messagesPlease check the following matters, reset the pertinentShould this happen, perform the measurements whenPress D H to select the items, then press F. Example. Cause. MeasuresIf so, select “Skip0”.Cable indicationsThe hookup diagrams on the subsequent pages assume the use of the following optional connection cables (not supplied). Audio cablePin-plug cableAnalog connections (Monaural, for subwoofer). S-Video cable. Pin-plug cableComponent video connectionsComponent video cableAudio and Video cableOptical fiber cableSignal direction. Audio signal. Speaker cableConnecting Other Sources. Relationship between the video input signal and monitor output according to the video convertThe video conversion functionWe recommendVideo convert. The flow of the video signals.Video terminals)Video terminals)AVR-887’s inputAVR-887’s outputC (1080p). C (1080p). C (1080p)E: No signal. The video conversion function is compatible with the following format: NTSC. PAL, SECAM, NTSC4.43, PAL-N, PAL-M and PAL-60. When SECAM signals of video input are up-converted, the signals are outputSignals up-converted to HDMI are output to the HDMI monitor with theNote that resolutions of 1080p are notCOMPONENT: On screen display only displayed for SYSTEM SETUP. SURROUND PARAMETER and ON SCREEN buttons.HDMI convert” is set to “ON”.Video convertNot used. Used. Not used. Connecting Other SourcesE: No signalCOMPONENT: On screen display only displayed for SYSTEM SETUP. SURROUND PARAMETER and ON SCREEN buttons.

Checking the currently playing program source,You can adjust the muting level (. Types of surround modes and their featuresThe AVR-887 is equipped with many surround modes. WeSources recorded in Dolby Digital EXListening over headphones. Connect the headphones to.Switching the front speakersDigital EX. Press STATUS.Switching the brightness of the display. Press DIMMER. The brightness of the display can be adjusted in three steps. ThePress to turn the corresponding speaker pairSources recorded in DTS-ESHD Surround.Basic Operation. Sources recorded in stereo. Sources recorded in monauralDENON Original Surround ModesSelect the one most suited for the source being used.The AVR-887 is equipped with three 2-channel playback modes exclusivelyThis mode reproduces the sound with extremely high quality. TheCINEMA (for movie sources), can be selected according toMUSIC for music sources, and GAME for 2-channel gameSelecting the play modeThis mode is for playing with high quality sound. The audio signals areUse this mode to adjust the tone and achieve the desired sound.Button name only. Buttons on the main unit and remote control unitDIRECT mode.Basic Operation. Selecting the Dolby Digital and DTS SurroundOPTICAL etc.) is set (Surround)”. Press INPUT MODE to select “AUTO”.Effective source modeSelect one of four modes: “OFF”,Effective source mode. DTS (For DTS sources, only displayed for compatible software.)Can be set in surround modes other than direct mode. Can be set separately for the different surround modes. (AdjustedSets the equalizer individually for each surround mode. See page 63. See page 57.Not played. Surround channel signal played. Surround channel signal played with digital matrix processing. DTS signal played with digital matrix processing. Signal included in DTS-ES discrete 6.1-channel sources played. Decoded in Dolby Pro Logic IIx Cinema mode, surround back signalSet the surround back speaker to “2spkrs” at “Speaker.

Configuration” (Decoded in Dolby Pro Logic IIx Music mode, surround back signalSet the surround back speaker to “1spkr” or “2spkrs” atExample: DTS. This operates automatically when playing Dolby Digital sources. This is a function for automatically correcting the standard signal levelThe correction value can be checked byDial.Norm. OffsetThe numbers are the correction value when corrected to the standard level.Basic OperationWhen “MUSIC” mode is selected. It is possible to play analog input signals and digital input signals (2channels) in the surround mode. This mode is optimal for playing program sources recorded in Dolby. Surround.Surround and general sources recorded in stereo.Because of this, the MUSIC mode offers a number of optionalThe GAME mode can only beAbout the button names in this explanationButton name only. Buttons on the main unit and remote control unitOptional parameters can only be set in the MUSIC mode. SelectPress ENTER to return to the previous screen.Basic Operation. Selecting the DTS NEO:6 mode. DOLBY PLIIxDecoding is performedSelecting the NEURAL SURROUND mode. This is the optimum mode for playing sources recorded in XM HD. Surround (When “MUSIC” mode is selected:HDMI monitor information. Auto surround mode. Tuner preset stationsChecking the input signals. Room EQ. Displays the type of equalizer currently set.Example: Dolby DigitalDisplays the input signal’s sampling frequency.The monitor’s resolution is displayed when an HDMI monitor isThis is displayed when the auto surround mode is set to “ON” (It is not displayed when the input mode is set to “ANALOG” orBasic Operation. Surround modes and parameters. Signals and adjustability in the different modes. Parameter (default values are shown in parentheses). Channel output. Surround ModeE: No signal. B: Turned on or off by speakerC (0 dB). C (0 dB)C (0 dB)C (0 dB). C (0 dB). C (0 dB)C (0 dB). C (0 dB)C (Medium). C (Medium). C (Medium)E: Not adjustable.

NOTE 2: This parameter is available when the “MODE” is set to “CINEMA”. NOTE 3: This parameter is available when the “MODE” is set to “CINEMA” or “PL”.DigitalE: No signalE: Not adjustableBasic OperationButton. Input signalsDOLBY PRO LOGIC IIx MUSIC. DOLBY PRO LOGIC IIx GAMEDVD-AudioDVD-AudioC: Selectable mode. E: Non-selectable modeBasic Operation. Button. Input signalsDVD-AudioDVD-AudioC: Selectable mode. Using the DENON original surround modes. The AVR-887 is equipped with a high performance digital signal processor (DSP) that uses digital signal processing to recreate sound fieldsTypes of surround modes and their featuresThe front L (R) channel signals are played from theNOTE 1: “5CH STEREO” is displayed when “SB CH OUT” is set to “OFF”. NOTE 2: When playing sources recorded in monaural, the sound will be one-sided if signals are only input to one channel (left or right), so inputIf you have a source component with only one audio output (monophonic camcorder, etc.) obtain a “Y”In this case, try other surround modes, withoutBasic Operation. Selecting the DSP surround simulationPress SURROUND PARAMETER.Surround back channel not played.There are five parameters: “small”, “med.s”, “medium”, “med.l”DELAY TIME: (MATRIX mode only). Adjust the delay time between “0 ms” and “110 ms”. About the button names in this explanationButton name only. Buttons on the main unit and remote control unitBasic Operation. Setting the tone control. Adjust the bass and treble to suit your tastes.Set “Tone Defeat” to “ON” at step 3 in “Adjusting theIn the direct mode, “TONE” cannot be selected. Adjusting the speaker volumeG to set the level. Press G to select “OFF”.The settable speaker switches each time this button is pressed. The SW channel level can be turned off by decreasing it one stepWith this function, the volume of all the front side speakers or all theThe fader function does not affect the subwoofer. It is possible to adjust so that the volume of the speaker whoseManual tuning.

Check that the remote control unit is set to “AUDIO”. Auto tuningWhen listening to the XM Satellite Radio (Check that the display’s “AUTO” indicator turns off.The frequency changes continuously when the button is held in.Button name only. Buttons on the main unit and remote control unitPreset memoryPress SHIFT to select the desired memory block (A toRecalling preset stationsXM Satellite Radio. AVR-887 is the XM Ready receiver. Radio by connecting to the XM Passport System (sold separately) andThere’s a world of audio listening pleasure beyond AM and FM. XM. Satellite Radio. Select from over 170 channels of music, news, sports,Coast-to-coast coverage. DigitalQuestions?: Visit www.xmradio.com. CHANNEL to select the desired preset channelListeners can subscribe by visiting XM on the Web at www.xmradio.comCustomers should have their Radio ID and credit card ready. The. Radio ID can be found by selecting channel 0 on the radio. A total of 56 broadcast stations can be preset — 8 stations (channelsIt is prohibited to copy, decompile, disassemble, reverse engineer, orInc. The user of this or any other software contained in an XM RadioThe software is licensedChecking the preset stations. Stations” screen appears on the on screen display.All fees andChannels with frequent explicitChannel blocking is available for. XM radio receivers by calling 1-800-XMRADIO. Subscriptions subjectRadio Inc. All rights reserved.Basic Operation. Checking the XM signal strength and Radio ID. Channel selectionDisplay. ConditionThe channel changes continuously when you press and hold TUNING. When the artist name and song title are received, they are displayed. Category searchRock. Channel category. Radio IDAbout the button names in this explanationButton name only. Buttons on the main unit and remote control unitNight mode. The night mode can be set when playing Dolby Digital sources. TheCalling the settings out.

Press at which the settings you want toCombining the currently playing sound with thePress VIDEO SELECT until the desired image appears onThe music recorded on the iPod can be played when using a Control. Dock for iPod (ASD-1R, sold separately). The iPod can be controlledWith the iPod, non-copyrighted contents and contents that may beViolating copyrights is prohibitedDock for iPod (ASD-1R) (Assignment” (Personal memory plus function. The AVR-887 is equipped with a function for storing the selected inputThe surround mode last selected and the input mode setting are storedThe surround parameters, tone control settings and playback levelIf the screens above are not displayed, the iPod may not be properlyStoring the settings in the memoryPress until “Memory” is displayed.Advanced OperationPress again to resume.Track search:The mode switches between the Browse mode and the Remote. Use this procedure to view photo and video data stored on the iPodDisconnecting the iPod. Buttons on the main unit and remote control unit. Viewing still pictures and videosStop. Shuffle play:Use the latest version of theScreen Display” to “OFF” (The AVR-887 can display up to 64A “?” mark is displayed in place of non-compatible characters.The iPod can be disconnected after switching to a function otherAdvanced Operation. Using external amplifier. Multi zone music entertainment systemIn this case, surround back speaker out cannot be used for MAIN ZONE.MAIN ZONE 5.1-channel systems. MonitorZONE2 Audio outInputProgrammableUsing this unit’s internal amplifier as the ZONE2.MAIN ZONE 5.1-channel systems. MonitorSystem remotePress to display the “ZONE2For operating instructions, refer to the manuals of the respectiveRemote control unit operations during multisource playback. This is only possible when the main unit in the ZONE2 mode (To cancel the ZONE2 mode:The ZONE2 source switches directly.Default setting (ZONE2 volume level):About the button names in this explanationButton name only.